Specifications
Type (LSAHSE) | Linear sets Side opening, adjustable, R1706 |
---|---|
Series (H) | Super h |
Shaft diameter (30) | 30 Shaft diameter |
---|---|
Seals (VD) | Fully sealed |
a)
Lubricating hole M8 x 1 sealed with plastic cap
S1 | M16 | ||
V | 8 | mm | |
D | 47 | mm | |
A | 86 | mm | |
E2 | 42 mm ±0.15 | ||
E4 | 52 | mm | |
Tolerance for H (Clamped (fastened) in relation to Ø d.) | + 8 - 16 |
||
H4 | 30 | mm | |
L2 | 27 | mm | |
N1 | 55 | mm | |
S | 13.50 |
SW | 3 | ||
W | 12.80 | mm | |
A | 60 | mm | |
E1 | 34 mm ±0.15 | ||
E3 | 52 | mm | |
H | 40 | mm | |
H1 | 82 | mm | |
L | 69 | mm | |
m (Clamped (fastened) in relation to Ø d.) | 25 mm ±0.01 | ||
N2 | 24 | mm | |
S2 | 10 |
amax | 150 | m/s² | |
m | 1.03 | kg | |
Breakaway force | 13.50 | N | |
Operating conditions | Operating conditions |
vmax | 5 | m/s | |
FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 6 | N | |
Radial clearance | Comes clamped to h5 shaft (lower limit) and set to zero clearance | ||
Permissible ambient temperature (min ... max) | -20 °C ... +80 °C |