Specifications
Type (LSAHSE) | Linear sets Side opening, adjustable, R1706 |
---|---|
Series (H) | Super h |
Shaft diameter (40) | 40 Shaft diameter |
---|---|
Seals (VD) | Fully sealed |
a)
Lubricating hole M8 x 1 sealed with plastic cap
S1 | M20 | ||
V | 10 | mm | |
D | 62 | mm | |
A | 110 | mm | |
E2 | 48 mm ±0.15 | ||
E4 | 60 | mm | |
Tolerance for H (Clamped (fastened) in relation to Ø d.) | + 8 - 16 |
||
H4 | 38 | mm | |
L2 | 31 | mm | |
N1 | 67 | mm | |
S | 15.50 |
SW | 4 | ||
W | 16.80 | mm | |
A | 60 | mm | |
E1 | 43 mm ±0.15 | ||
E3 | 65 | mm | |
H | 45 | mm | |
H1 | 100 | mm | |
L | 81 | mm | |
m (Clamped (fastened) in relation to Ø d.) | 32 mm ±0.01 | ||
N2 | 30 | mm | |
S2 | 12 |
amax | 150 | m/s² | |
m | 1.80 | kg | |
Breakaway force | 18 | N | |
Operating conditions | Operating conditions |
vmax | 5 | m/s | |
FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 7.50 | N | |
Radial clearance | Comes clamped to h5 shaft (lower limit) and set to zero clearance | ||
Permissible ambient temperature (min ... max) | -20 °C ... +80 °C |