Rexroth R18513312A roller runner block carbon steel

RWD-035-FNS-C3-S-2-AS

$1,341.20 Limited stock only available on quotation

Specifications

  • High torque capacity
  • The same high load ratings in all four main directions of loading
  • Maximum rigidity under load from all directions through two additional mounting screw holes at the center of the roller runner block
  • Unrestricted interchangeability
  • All guide rail versions can be combined at will with all roller runner block variants

Series (R1851) Flanged, normal, standard height R1851...2
Size (3) 35 size
Preload class (3) C3 High preload
Accuracy class (1) SP Super Precision Accuracy Level
Seals (2A) AS with longitudinal seal

a) For O-ring: Size 25: Ø 5 • 1.5 (mm), size 35 to 65: Ø 7 • 1.5 (mm). Open lube port if necessary (see lubricating and mounting instructions).
b) Recommended position for pin holes (E4 dimensions, see lubricating and mounting instructions). Pre-drilled holes may be present at this position for manufacturing reasons. They are suitable for drilling out.
c) Lube nipple, thread M6 - 8 deep: Connection is possible on all sides (at front and top for size 25). Dimensions differ among different connectors See "Accessories" for more information about lube ports.
d) For Roller Guide Rails of accuracy class H, this base area may be without a base slot for manufacturing reasons.
e) Sealing plugs may be present at this position for manufacturing reasons. Remove these prior to mounting.
f) Size 65

N6 19.4 mm ±0.5
ØS5 9 mm
T (Dimension T = Division of the Roller Guide Rail) 40 mm
A 100 mm
A2 34 mm
A4 (Dimension A4 = Width of the additional longitudinal seal ) 47 mm
B1 79.60 mm
E2 62 mm
E4 80 mm
E8.1 -
E9 13.10 mm
E9.2 29.10 mm
H1 41 mm
Dimension H2 without cover strip 30.80 mm
K1 15.55 mm
N1 12 mm
N5 7 mm
S2 M10
S9 (Thread for adjoining parts) M3 ‒ 6mm deep
V1 8 mm
A1 50 mm
A3 33 mm
B 118
E1 82 mm
E3 52 mm
E8 50.30 mm
E8.2 60.50 mm
E9.1 -
H 48 mm
Dimension H2 with cover strip 31.10 mm
H3 (Dimension H= Total Roller Runner Block height including the additional longitudinal seal ) 43 mm
K2 17.40 mm
N2 11 mm
ØS1 8,5
amax (Prerequisite: There must be preload, even during operation under load.) 150 m/s²
m 2.15 kg
m (Without friction of seal) 0,0004 ... 0,001
Size 35
vmax 4 m/s
FR (Guideline value for frictional drags of the complete, sealed and lubricated roller runner blocks. ) 35 N
Operating conditions Operating conditions
Permissible ambient temperature (min ... max) (Brief peaks up to 100 °C are permitted. For even lower sub-zero temperatures, please consult us. ) -10 °C ... +80 °C
$1,341.20
Stock Ask for quotation
Part number R18513312A
Manufacturer Rexroth
Quantity Unit Price
1+ $1,341.20

  • Open Registration
    Create your account instantly
  • Support 24/7
    Ask us anytime
  • 100% Safety
    Only secure payments: bank transfer, credit card and PayPal
  • Volume Discounts
    Optimize your supplies