R200029331 Bosch Rexroth

REXROTH R200029331 ball runner block

Name: R200029331 REXROTH
Brand: REXROTH
SKU: 111830-en-usd
Price: 192.97 USD
Availability: SoldOut

RESIST NR KWD-025-FKS-C0-H-1

$192.97 Limited stock only available on quotation

Specifications

Area of application: For restricted space in the longitudinal direction
Significantly reduced frictional oscillations and low friction level, particularly under external load
Maximum precision
Ball Runner Block body made of corrosion-resistant steel as per DIN EN 10088. Version recommended by Rexroth if corrosion protection is required. Fast delivery.
Patented entry zone increases the travel accuracy up to a factor of six

Ball runner block NR with corrosion-resistant steel

Series (R2000)	Flange, short, standard height R2000
Size (2)	25 size
Preload class (9)	C0 Without preload (clearance)

Accuracy class (3)	H Hight Accuracy Level
Seals (31)	LS Low-friction seal without ball chain

Dimensions
Technical data

^a) For O-ring
Size 15: Ø 4 · 1.0 (mm)
Size 20 - 35: Ø 5 · 1.0 (mm)
Open lube port if necessary (see general technical notes and information in the "Maintenance" section).
^b) Lube nipple, size 15 - 20:
Funnel-type lube nipple DIN 3405-A M3x5, B₂ = 1.6 mm
When using different lube nipples, pay attention to the screw-in depth of 5 mm!
Lube nipple, size 25 - 35:
Hydraulic-type lube nipple DIN 71412-A M6x8, B₂ = 9.5 mm
When using different lube nipples, pay attention to the screw-in depth of 8 mm!
The lube nipple is included in the scope of delivery (not installed).
Connection is possible on all sides.

S₂	M8
S₉	M3x5
V₁	7.50	mm
A₁	35	mm
A₃	23.50	mm
B₁	38.60	mm
E₈	38.30	mm
H	36	mm
Dimension H₂ with cover strip	24.45	mm
K₁	25.35	mm
K₃	5.50	mm
N₁	9.30	mm
S₁	6.70	mm

ØS₅	7	mm
T	60	mm
A	70	mm
A₂	23	mm
B	67 mm +0.5
E₁	57	mm
E₉	11.50	mm
H₁	29.90	mm
Dimension H₂ without cover strip	24.25	mm
K₂	26.50	mm
K₄	5.50	mm
N₆	15.2 mm ±0.5

a_max (If F_comb > 2.8 • F_pr : a_max = 50 m/s²)	500	m/s²
m	0.50	kg
Operating conditions	Operating conditions
Permissible ambient temperature (min ... max) (Up to 100 °C permissible for short periods. For operation at negative temperatures, please consult us. )	-10 °C ... +80 °C