REXROTH R200179314 ball runner block nrfg

^a) For O-ring
Size 15: Ø 4 · 1.0 (mm)
Sizes 20 - 35: Ø 5 · 1.0 (mm)
Open the lube port if required.
^b) Recommended position for pin holes
Pre-drilled holes may be present at this position for manufacturing reasons. These can be drilled open.
^c) Lube nipple, sizes 15 – 20:
Funnel-type lube nipple DIN 3405-A M3x5, B₂ = 1.6 mm
When using different lube nipples, observe the screw-in depth of 5 mm!
Lube nipple, sizes 25 - 35:
Hydraulic-type lube nipple DIN 71412-A M6x8, B₂ = 9.5 mm
When using different lube nipples, observe the screw-in depth of 8 mm!
The lube nipple is included in the scope of delivery (not installed).
Connection possible on all sides.
^d) Sealing plugs maybe present at this position for manufacturing reasons. Remove before mounting.