R200212204 Bosch Rexroth

REXROTH R200212204 ball runner block resist nrii

Name: R200212204 REXROTH
Brand: REXROTH
SKU: 111529-en-usd
Price: 365.4 USD
Availability: SoldOut

KWD-015-FLS-C2-P-0

$365.40 Limited stock only available on quotation

Specifications

Area of application: For the most demanding rigidity requirements
Long-term lubrication is possible over several years
Maximum precision
Ball Runner Block body and Ball Guide Rail as well as all steel parts made of corrosion-resistant steel in accordance with DIN EN 10088
Patented entry zone increases the travel accuracy up to a factor of six

Ball Runner Blocks Resist NR II made of corrosion-resistant steel are used particularly in applications involving waterbased media. They are also suitable for environments with a relative humidity of over 70% and temperatures above 30 °C

Series (R2002)	Flange, long, standard height R2002
Size (1)	15 size
Preload class (2)	C2 Average preload

Accuracy class (2)	P Precision Accuracy Level
Seals (04)	SS Standard seal without ball chain

Dimensions
Technical data

^a) For O-ring
Size 15: Ø 4 · 1.0 (mm)
Size 20 - 35: Ø 5 · 1.0 (mm)
Open lube port if necessary (see general technical notes and information in the "Maintenance" section).
^b) Recommended position for pin holes (dimension E₄ see general technical notes and information in the "Installation" section)
Rough-drilled holes may be present here from manufacturing. These may be bored open.
^c) Lube nipple, size 15 - 20:
Funnel-type lube nipple DIN 3405-A M3x5, B₂ = 1.6 mm
When using different lube nipples, pay attention to the screw-in depth of 5 mm!
Lube nipple, size 25 - 35:
Hydraulic-type lube nipple DIN 71412-A M6x8, B₂ = 9.5 mm
When using different lube nipples, pay attention to the screw-in depth of 8 mm!
The lube nipple is included in the scope of delivery (not installed).
Connection is possible on all sides.
^d) Sealing plugs may be present here from manufacturing. Remove these prior to mounting.

S₁	4.30	mm
ØS₅	4.50	mm
T	60	mm
A	47	mm
A₂	15	mm
B	72.6 mm +0.5
E₁	38	mm
E₃	26	mm
E₉	6.70	mm
H₁	19.90	mm
Dimension H₂ without cover strip	16.20	mm
K₂	16.80	mm
K₄	3.20	mm
N₂	4.40	mm

S₂	M5
S₉	M2.5x3.5
V₁	5	mm
A₁	23.50	mm
A₃	16	mm
B₁	53.60	mm
E₂	30	mm
E₈	24.55	mm
H	24	mm
Dimension H₂ with cover strip	16.30	mm
K₁	15.20	mm
K₃	3.20	mm
N₁	5.20	mm
N₆	10.3 mm ±0.5

a_max (If F_comb > 2.8 • F_pr : a_max = 50 m/s²)	500	m/s²
m	0.30	kg
Operating conditions	Operating conditions
Permissible ambient temperature (min ... max) (Up to 100 °C permissible for short periods. For operation at negative temperatures, please consult us. )	-10 °C ... +80 °C