R200231333 Bosch Rexroth

REXROTH R200231333 ball runner block

Name: R200231333 REXROTH
Brand: REXROTH
SKU: 111517-en-usd
Price: 274.56 USD
Availability: SoldOut

RESIST NR KWD-035-FLS-C1-H-1

$274.56 Limited stock only available on quotation

Specifications

Area of application: For the most demanding rigidity requirements
Maximum precision
Significantly reduced frictional oscillations and low friction level, particularly under external load
Ball Runner Block body made of corrosion-resistant steel as per DIN EN 10088. Version recommended by Rexroth if corrosion protection is required. Fast delivery.
Patented entry zone increases the travel accuracy up to a factor of six

Ball runner block NR with corrosion-resistant steel

Series (R2002)	Flange, long, standard height R2002
Size (3)	35 size
Preload class (1)	C1 Moderate preload

Accuracy class (3)	H Hight Accuracy Level
Seals (33)	SS Standard seal with ball chain

Dimensions
Technical data

^a) For O-ring
Size 15: Ø 4 · 1.0 (mm)
Size 20 - 35: Ø 5 · 1.0 (mm)
Open lube port if necessary (see general technical notes and information in the "Maintenance" section).
^b) Recommended position for pin holes (dimension E₄ see general technical notes and information in the "Installation" section)
Rough-drilled holes may be present here from manufacturing. These may be bored open.
^c) Lube nipple, size 15 - 20:
Funnel-type lube nipple DIN 3405-A M3x5, B₂ = 1.6 mm
When using different lube nipples, pay attention to the screw-in depth of 5 mm!
Lube nipple, size 25 - 35:
Hydraulic-type lube nipple DIN 71412-A M6x8, B₂ = 9.5 mm
When using different lube nipples, pay attention to the screw-in depth of 8 mm!
The lube nipple is included in the scope of delivery (not installed).
Connection is possible on all sides.
^d) Sealing plugs may be present here from manufacturing. Remove these prior to mounting.

S₂	M10
S₉	M3x5
V₁	8	mm
A₁	50	mm
A₃	33	mm
B₁	105.50	mm
E₂	62	mm
E₈	58	mm
H	48	mm
Dimension H₂ with cover strip	32.15	mm
K₁	28.75	mm
K₃	6.90	mm
N₁	12	mm
N₆	20.5 mm ±0.5

ØS₅	9	mm
T	80	mm
A	100	mm
A₂	34	mm
B	139 mm +0.5
E₁	82	mm
E₃	52	mm
E₉	17.35	mm
H₁	40.40	mm
Dimension H₂ without cover strip	31.85	mm
K₂	30.25	mm
K₄	6.90	mm
N₂	10.15	mm
S₁	8.50	mm

a_max (If F_comb > 2.8 • F_pr : a_max = 50 m/s²)	500	m/s²
m	2.25	kg
Operating conditions	Operating conditions
Permissible ambient temperature (min ... max) (Up to 100 °C permissible for short periods. For operation at negative temperatures, please consult us. )	0 °C ... +80 °C