Rexroth R901104892 pump safety block
DBAW30BF2-2X/250-6EW230N9K4A08
$1,942.13
Limited stock
only available on quotation
Specifications
- Size 16 … 32
- Component series 2X
- Maximum operating pressure 350 bar
- Maximum flow 400 l/min
| Series (DBA) | Pump safety block |
|---|---|
| Valve type (W) | With mounted directional spool valve (data sheet 23178) |
| Size (30) | Size 32 |
| Directional valve (B) | With mounted directional valve, normally open; generally type DBAE(E)(A) |
| Type of connection / SAE flange (F) | Standard flange (250 … 350 bar) |
| Adjustment Type for Pressure Adjustment (2) | Sleeve with hexagon and protective cap |
| With mounted pressure switch | Without pressure switch |
| Component Series (2X) | 20 … 29 (20 … 29: unchanged installation and connection dimensions) |
| Pressure rating (250) | Set pressure up to 250 bar (only NG32 and standard flange 'F') |
| Pressure relief valve | Without additional pressure relief valve |
| Version | Standard version |
| Shock damping | Without shock damping |
|---|---|
| Directional valve (6E) | With directional spool valve (only type DBAW) |
| Electrical voltages (W230) | AC voltage 230 V 50/60 Hz |
| With manual override (N9) | With concealed manual override (standard) |
| Electrical connection (K4) | Connector 3-pole (2 + PE) according to EN 175301-803 |
| Electronics interface | Without electronics (versions 'DBA' and 'DBAW') |
| Nozzle fitting (A08) | Nozzle Ø0.8 mm in lateral channel, transverse channel open; pilot oil bore closed (standard for control pumps with DFR1 or DFLR controller) |
| Seal Material | NBR seals |
| Type-examination procedure | Without type-examination procedure |
| Solenoid coil | Standard solenoid coil |
