Rexroth R901250542 pump safety block
DBAEE25BH2-2X/350G24K31A1
$3,585.48
Limited stock
only available on quotation
Specifications
- Size 16 … 32
- Component series 2X
- Maximum operating pressure 350 bar
- Maximum flow 400 l/min
| Series (DBA) | Pump safety block |
|---|---|
| Valve type (EE) | With mounted proportional pressure relief valve with on-board control electronics, type DBETE-6X/.Y… (data sheet 29162) |
| Size (25) | Size 25 |
| Directional valve (B) | With mounted directional valve, normally open; generally type DBAE(E)(A) |
| Type of connection / SAE flange (H) | High-pressure flange (350 bar) |
| Adjustment Type for Pressure Adjustment (2) | Sleeve with hexagon and protective cap |
| With mounted pressure switch | Without pressure switch |
| Component Series (2X) | 20 … 29 (20 … 29: unchanged installation and connection dimensions) |
| Pressure rating (350) | Set pressure up to 350 bar |
| Pressure relief valve | Without additional pressure relief valve |
| Version | Standard version |
| Shock damping | Without shock damping |
|---|---|
| Directional valve | Without directional valve |
| Electrical voltages (G24) | DC voltage 24 V (in general with version 'DBAE(E)(A)…') |
| With manual override | Without manual override |
| Electrical connection (K31) | Connector 7-pole (6 + PE) according to EN 175201-804 (only version 'DBAEE' and 'DBAEA') |
| Electronics interface (A1) | Command value 0 … 10 V (only versions 'DBAEE' and 'DBAEA') |
| Nozzle fitting | Lateral channel closed, transverse channel open, pilot oil bore open; (standard for displacement pumps; pure DB-/DBW function) |
| Seal Material | NBR seals |
| Type-examination procedure | Without type-examination procedure |
| Solenoid coil | Standard solenoid coil |
