| Suitability for the production of Li-ion batteries | Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils | ||
| Type of mounting | Front panel mounting Via thread Via wall/surface bracket | ||
| Pneumatic connection | Male thread R1/8 Female thread M5 | ||
| Material housing | PA-reinforced | ||
| Display type | Illuminated LCD | ||
| Setting options | IO-Link® Teach-in Via display and keys | ||
| Setting range threshold value | 0 % ... 100 % | ||
| Degree of protection | IP40 | ||
| LABS (PWIS) conformity | VDMA24364-B1/B2-L | ||
| Approval | RCM trademark c UL us listed (OL) | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
| Note on materials | RoHS-compliant | ||
| Measurement method | Piezoresistive pressure sensor | ||
| End value for pressure measuring range | 145 psi | ||
| Overload pressure | 217,5 psi | ||
| Note on operating and pilot medium | Lubricated operation possible | ||
| Ambient temperature | 0 °C ... 50 °C | ||
| Repetition accuracy in ± %FS | 0,3 %FS | ||
| Switching output | 2 x PNP or 2 x NPN, switchable | ||
| Switching element function | N/C or N/O contact, switchable | ||
| Analogue output | 0 - 10 V 4 - 20 mA 1 - 5 V | ||
| Min. load resistance voltage output | 20 kOhm | ||
| Protocol | IO-Link® | ||
| IO-Link, Profile | Smart sensor profile | ||
| IO-Link, communication mode | COM2 (38.4 kBaud) | ||
| IO-Link, Port class | A | ||
| IO-Link, Process data length IN | 2 bytes | ||
| IO-Link, Min. cycle time | 3 ms | ||
| Operational voltage range DC | 15 V ... 30 V | ||
| Electrical connection 1, connection type | Plugs | ||
| Electrical connection 1, number of connections/cores | 4 |
| Electrical connection 1, connection pattern | 995,428 | ||
| Mounting position | optional | ||
| Product weight | 46 g | ||
| Material in contact with the medium | FPM High-alloy stainless steel | ||
| Displayable units | MPa bar inH2O inHg kPa kgf/cm² mbar mmHg psi | ||
| Protection against tampering | IO-Link PIN code | ||
| Setting range hysteresis | 0 % ... 90 % | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
| Symbol | 995,685 | ||
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive | ||
| Certificate issuing authority | UL E322346 | ||
| Measured variable | Relative pressure | ||
| Start value for pressure measuring range | -14,5 psi | ||
| Max. overload pressure | 15 bar | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gases | ||
| Media temperature | 0 °C ... 50 °C | ||
| Accuracy in ± % FS | 1,5 %FS | ||
| Temperature coefficient in ± %FS/K | 0,05 %FS/K | ||
| Switching function | Window comparator Threshold value comparator Auto difference monitoring | ||
| Max. output current | 100 mA | ||
| Max. load resistance current output | 500 Ohm | ||
| Short circuit current rating | yes | ||
| IO-Link, Protocol version | Device V 1.1 | ||
| IO-Link, Function classes | Binary data channel (BDC) Process data variable (PDV) Identification Diagnostics Teach channel | ||
| IO-Link, SIO-Mode support | Yes | ||
| IO-Link, Process data length OUT | 0 bytes | ||
| IO-Link, Process data content IN | 14 bit PDV (pressure measurement value) 2 bit BDC (pressure monitoring) | ||
| IO-Link, Data storage required | 500 Byte | ||
| Reverse polarity protection | For all electrical connections | ||
| Electrical connection 1, connector system | Connection pattern L1J |
