| Mounting position | optional | ||
| Min. pick-up time | 12 ms | ||
| Power factor (cos phi) | 0,7 | ||
| Immunity to surge | 2,5 kV | ||
| Permissible frequency fluctuations | +/- 10% | ||
| CE mark (see declaration of conformity) | To EU Low Voltage Directive | ||
| Restrictions for environmental and media temperature | (with limited duty cycle) -20 ... 60° C | ||
| LABS (PWIS) conformity | VDMA24364 zone III | ||
| Note on degree of protection | In assembled state | ||
| Max. tightening torque for fitting | 2 Nm | ||
| Electrical connection | Type A Plugs To DIN EN 175301-803 Square design | ||
| Note on materials | RoHS-compliant | ||
| Material winding | Copper |
| Switching position indicator | no | ||
| Duty cycle | 100% | ||
| Characteristic coil data | 110 V AC: 50/60 Hz, pick-up power 36.0 VA, holding power 18.5 VA | ||
| Pollution degree | 3 | ||
| Permissible voltage fluctuations | +/- 10 % | ||
| CE marking (see declaration of conformity) | To UK regulations for electrical equipment | ||
| Corrosion resistance class CRC | 4 - Very high corrosion stress | ||
| Degree of protection | IP65 | ||
| Ambient temperature | -20 °C ... 50 °C | ||
| Product weight | 150 g | ||
| Type of mounting | Via lock nut | ||
| Material solenoid coil | Copper Steel Thermoplastic |
