| Note on materials | RoHS-compliant | ||
| Type of mounting | With through-hole With H-rail Either: | ||
| LED display, product-specific | Signal at input/output | ||
| Addressing range | Standard slave: 1 ... 31 | ||
| Characteristic for inputs | To IEC 1131-2, type 02 | ||
| Ambient temperature | -5 °C ... 50 °C | ||
| Storage temperature | -20 °C ... 40 °C | ||
| Corrosion resistance class CRC | 1 - Low corrosion stress | ||
| Residual ripple, load voltage | 4 Vpp | ||
| Max. number of inputs | 8 | ||
| Note on load voltage | Via load voltage connection (24 V DC) | ||
| Operating voltage DC AS-interface | 26,5 V ... 31,6 V | ||
| Number of slaves per device | 2 | ||
| Max. number of valve positions | 8 | ||
| Field bus interface | Socket, M12 (ASI Out) Plug connector, M12 (ASI In) |
| Material housing | Die-cast aluminium PA | ||
| Product identification | ID code: ID=Fh, ID1=Fh, ID2=Eh IO code: 7h Profile: S-7.F.E | ||
| LED display, bus-specific | AS-i: AS-Interface mode Aux/Pwr: AS-Interface power supply Fault: AS-Interface fault | ||
| Switching logic for inputs | PNP (positive switching) | ||
| Product weight | 360 g | ||
| Degree of protection | IP20 | ||
| LABS (PWIS) conformity | VDMA24364-B1/B2-L | ||
| Current consumption with load supply from AS-interface connection and load voltage connection | Max. resultant current for inputs 350 mA Max. resultant current for outputs MPA1: 540 mA Max. resultant current for outputs MPA2: 1065 mA | ||
| Residual ripple, AS interface | <= 20 mVpp | ||
| Logic level digital inputs | ON: 11 - 30 V AUS: -30 - 5 V | ||
| Operating voltage DC load voltage | 21,6 V ... 26,4 V | ||
| Operating voltage range DC electronics/sensors | US+/US- : <= AS-Interface bus voltage - 2.5 V | ||
| Message delay inputs | Typ. 3 ms at 24 V | ||
| Device-specific diagnostics | AS-i voltage AS-Interface address Watchdog/I/O status Additional power supply not applied or undervoltage | ||
| Dimensions (W x L x H) | 85 x 122.9 x 55.1 mm |
