| Pneumatic connection, port 1 | G1/8 | ||
| Electrical connection 1, tightening torque | 1,5 Nm | ||
| Pneumatic connection, port 2 | G1/8 | ||
| Max. tightening torque for fitting | 8,5 Nm | ||
| Material housing | PA-reinforced | ||
| Nominal size, supply | 5 mm | ||
| Type of actuation | Electric | ||
| Total leakage | 5 l/h | ||
| Mounting position | optional | ||
| Short circuit current rating | For all electrical connections | ||
| Setpoint value input | 0 - 10 V 4 - 20 mA PWM Digital | ||
| Safety instructions | Safety position VPPI, normally closed Safety position VPPI, normally open | ||
| Reverse polarity protection | For all electrical connections | ||
| Dimensions (W x L x H) | 42.2 x 95.3 x 94.3 mm | ||
| Valve function | 3-way proportional pressure regulator | ||
| Display size | 1.77" | ||
| Operating pressure | 0 bar ... 13 bar | ||
| Inlet pressure 1 | 0 MPa ... 1,3 MPa | ||
| Burst pressure | 40 bar | ||
| Standard nominal flow rate 2-3 | 20 l/min ... 850 l/min | ||
| Nominal operating voltage DC | 24 V | ||
| Max. output current | 25 mA | ||
| Max. load resistance current output | 500 Ohm | ||
| Accuracy analogue output in ± %FS | 1 %FS | ||
| Note on operating and pilot medium | Lubricated operation not possible | ||
| KC mark | KC-EMV | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 | ||
| LABS (PWIS) conformity | VDMA24364-B1/B2-L | ||
| Media temperature | 0 °C ... 50 °C | ||
| Ambient temperature | 0 °C ... 50 °C | ||
| Climatic category | 3K3 as per EN 60721 | ||
| Instructions on use | The product is suitable for industrial purposes only. Measures to eliminate radio interference may be required in residential areas. | ||
| Sound power level at a distance of 1 m | 51,9 dB(A) | ||
| Linearity | 0,9 %FS | ||
| Reproducibility | 0,4 %FS | ||
| Temperature cooefficient | 0,02 %/K | ||
| Electrical connection 1, connection type | Plugs | ||
| Electrical connection 1, number of connections/cores | 5 |
| Electrical connection 1, connection pattern | 00994083 | ||
| Type of mounting | Via through-hole for M4 screw With H-rail | ||
| Pneumatic connection, port 3 | G1/8 | ||
| Note on materials | RoHS-compliant | ||
| Material seals | HNBR PTFE | ||
| Nominal size, exhaust | 5 mm | ||
| Sealing principle | Soft | ||
| Flow direction | Non-reversible | ||
| Design | Poppet valve with spring return | ||
| Max. cable length | 30 m | ||
| Input resistance | 0,3 kOhm ... 100 kOhm | ||
| Symbol | 00997299 00997300 | ||
| Type of reset | Mechanical spring | ||
| Type of piloting | Direct | ||
| Display type | LED TFT colour | ||
| Display resolution | 128x160 pixels | ||
| Pressure regulation range | -1 bar ... 12 bar | ||
| Input pressure 3 | -1 bar ... 0 bar | ||
| Standard nominal flow rate | 150 l/min ... 1.630 l/min | ||
| Operational voltage range DC | 21,6 V ... 27,6 V | ||
| Switching output | Push-pull | ||
| Signal range analogue output | 0 - 10 V 4 - 20 mA | ||
| Min. load resistance voltage output | 2 kOhm | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gases | ||
| Approval | RCM trademark | ||
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive | ||
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
| Suitable for use with food | See supplementary material information | ||
| Degree of protection | IP65 | ||
| Storage temperature | -20 °C ... 70 °C | ||
| Nominal altitude of use | < 3000 m NHN | ||
| Sound power level | 62,5 dB(A) | ||
| Product weight | 365 g ... 370 g | ||
| Hysteresis | 0,4 %FS | ||
| Total accuracy | 1.1%FS | ||
| Electrical connection 1, function | Actual value output Setpoint input Power supply | ||
| Electrical connection 1, connector system | M12x1, A-coded to EN 61076-2-101 |
