| Nominal size | 4 mm | ||
| Sealing principle | Hard | ||
| Design | Piston gate valve With integrated pressure sensors | ||
| Safety instructions | Safety position VPWP: if there is a problem with the control interface, the valve assumes the closed mid-position. | ||
| Flow direction | Non-reversible | ||
| Valve function | 5/3-way proportional directional control valve, closed | ||
| Operating pressure | 0 bar ... 10 bar | ||
| Nominal operating pressure | 87 psi | ||
| Nominal operating voltage DC | 24 V | ||
| Load voltage range DC | 18 V ... 30 V | ||
| Max. load current of the digital output | 500 mA | ||
| Max. current consumption, logic | 0,15 A | ||
| Supply voltage of the digital output | 24 V load voltage | ||
| Approval | RCM trademark | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK EX instructions To UK RoHS instructions | ||
| ATEX category gas | II 3G | ||
| Explosion ambient temperature | 0°C <= Ta <= +50°C | ||
| Note on operating and pilot medium | Lubricated operation not possible | ||
| LABS (PWIS) conformity | VDMA24364-B1/B2-L | ||
| Degree of protection | IP65 In assembled state | ||
| Product weight | 776 g | ||
| Linearity error in ± %FS | < 1,5 % | ||
| Design of the 24 V voltage output | Reverse supply with no damage No galvanic isolation Protected against short circuits Reverse supply with no damage | ||
| Control-Interface | Digital CAN bus with Festo protocol Integrated terminating resistor | ||
| Electrical connection fieldbus interface OUT | Socket M9 5-pin | ||
| Type of mounting | With through-hole With accessories | ||
| Pneumatic connection, port 1 | G1/8 | ||
| Pneumatic connection, port 3 | G1/8 | ||
| Pneumatic connection, port 5 | G1/8 | ||
| Material cover | PA-reinforced |
| Type of actuation | Electric | ||
| Mounting position | optional Preferably horizontal (display elements facing upwards) If the valve is moved, it must be mounted at a right angle to the direction of movement | ||
| Type of reset | Magnetic spring | ||
| Type of piloting | Direct | ||
| Symbol | 00992136 | ||
| Status displays | LED yellow = PL (power load) LED green = power LED red = error | ||
| Operating pressure positioning/Soft Stop | 4 bar ... 8 bar | ||
| Standard nominal flow rate | 350 l/min | ||
| Operational voltage range DC | 18 V ... 30 V | ||
| Max. load current of the voltage output | 500 mA | ||
| Max. current consumption of valve drive | 1,2 A | ||
| Nominal load voltage DC | 24 V | ||
| Supply voltage of the voltage output | 24 V load voltage | ||
| CE mark (see declaration of conformity) | To EU EMC Directive To EU Explosion Protection Directive (ATEX) In accordance with EU RoHS Directive | ||
| Explosion protection | Zone 2 (ATEX) | ||
| Explosion ignition protection type for gas | Ex nA IIC T5 X Gc | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [6:4:4] | ||
| Corrosion resistance class CRC | 1 - Low corrosion stress | ||
| Media temperature | 0 °C ... 50 °C | ||
| Ambient temperature | 0 °C ... 50 °C | ||
| Pressure resolution | 0,01 bar | ||
| Repetition accuracy FS | < 1 % | ||
| Digital output design | To IEC 61131-2 Positive logic (PNP) No galvanic isolation Protected against short circuits Reverse supply with no damage | ||
| Electrical connection fieldbus interface IN | Plugs M9 5-pin | ||
| Fieldbus interface electrical connection | Socket M8 4-pin | ||
| Colour of connections | Port 2: Blue Connection 4: black | ||
| Pneumatic connection, port 2 | G1/8 | ||
| Pneumatic connection, port 4 | G1/8 | ||
| Note on materials | RoHS-compliant | ||
| Material housing | Wrought aluminium alloy Anodised |
