| Valve function | 3/2-way, closed, monostable | ||
| Construction width | 15 mm | ||
| pneumatic working port | Sub-base size 15 mm to ISO 15218 | ||
| Operating pressure | 0 psi ... 145 psi | ||
| CE mark (see declaration of conformity) | To EU Low Voltage Directive | ||
| Degree of protection | IP65 | ||
| Mounting position | optional | ||
| Manual override | Non-detenting | ||
| Flow direction | Non-reversible | ||
| lap | Underlap | ||
| Switching time off | 6 ms | ||
| Duty cycle | 100% | ||
| Permissible voltage fluctuations | -15%/+10% | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 | ||
| LABS (PWIS) conformity | VDMA24364-C1-L | ||
| Ambient temperature | -10 °C ... 50 °C | ||
| Pneumatic connection, port 1 | Sub-base | ||
| Pneumatic connection, port 3 | Sub-base | ||
| Material seals | NBR |
| Type of actuation | Electric | ||
| Standard nominal flow rate | 18 l/min | ||
| Operating voltage | 230V AC | ||
| Type of reset | Mechanical spring | ||
| CE marking (see declaration of conformity) | To UK regulations for electrical equipment | ||
| Sealing principle | Soft | ||
| Conforms to standard | ISO 15218 | ||
| Type of piloting | Direct | ||
| Symbol | 991,308 | ||
| Note on forced dynamization | Switching frequency min. 1/week | ||
| Switching time on | 6 ms | ||
| Characteristic coil data | 230 V AC: 50/60 Hz, pick-up power 2.9 VA, holding power 2.1 VA | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
| Media temperature | -10 °C ... 50 °C | ||
| Electrical connection | Type C To DIN EN 175301-803 | ||
| Pneumatic connection, port 2 | Sub-base | ||
| Note on materials | RoHS-compliant |
