Type of actuation | Electric | ||
Material screws | Steel Galvanised | ||
Material seals | FPM HNBR NBR | ||
Pneumatic connection, port 5 | Sub-base size 2 to ISO 5599-1 | ||
Pneumatic connection, port 3 | Sub-base size 2 to ISO 5599-1 | ||
Pneumatic connection, port 1 | Sub-base size 2 to ISO 5599-1 | ||
Pilot air port 12/14 | Sub-base size 2 to ISO 5599-1 | ||
Electrical connection | 3-pin M12x1 Central plug Round design | ||
Ambient temperature | -5 °C ... 50 °C | ||
Relative air humidity | 0 - 90% | ||
Corrosion resistance class CRC | 0 - No corrosion stress | ||
Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Characteristic coil data | 24 V DC: 4.6 W | ||
Nominal pick-up current per solenoid coil | 165 mA up to 30 ms | ||
Max. positive test pulse with 0 signal | 1.000 µs | ||
Switching time on | 20 ms | ||
Flow rate of pneumatically interlinked valve | 2.800 l/min | ||
Flow rate of valve | 4.000 l/min | ||
Signal status display | LED | ||
Symbol | 991,190 | ||
Pilot air supply | External | ||
Manual override | Detenting Non-detenting | ||
Mounting position | optional | ||
Exhaust-air function | With flow control option Via throttle plate Via individual sub-base | ||
Nominal size | 15 mm | ||
CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
KC mark | KC-EMV | ||
Type of reset | Mechanical spring | ||
Operating pressure | -0,9 bar ... 16 bar | ||
pneumatic working port | Sub-base size 2 to ISO 5599-1 G3/8 | ||
Construction width | 52 mm |
Valve function | 5/2-way, monostable | ||
Material housing | Die-cast aluminium PA | ||
Note on materials | RoHS-compliant | ||
Pneumatic connection, port 4 | Sub-base size 2 to ISO 5599-1 | ||
Pneumatic connection, port 2 | Sub-base size 2 to ISO 5599-1 | ||
Pilot exhaust port 82/84 | Ducted Not ducted as per standard Either: | ||
Type of mounting | On sub-base | ||
Product weight | 702 g | ||
Pilot medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Media temperature | -5 °C ... 50 °C | ||
Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Permissible voltage fluctuations | +/- 10 % | ||
Nominal current with current reduction | 35 mA after 30 ms | ||
Max. negative test pulse with 1 signal | 3.500 µs | ||
Duty cycle | 100% | ||
Switching time off | 60 ms | ||
Flow rate of valve on individual sub-base | 2.400 l/min | ||
Pilot pressure | 3 bar ... 10 bar | ||
lap | Positive overlap | ||
Flow direction | optional | ||
Type of piloting | Pilot actuated | ||
Conforms to standard | ISO 5599-1 | ||
Sealing principle | Soft | ||
Grid dimension | 59 mm | ||
Degree of protection | IP65 NEMA 4 | ||
CE mark (see declaration of conformity) | To EU EMC Directive | ||
Approval | C-Tick c CSA us (OL) c UL us - Recognized (OL) | ||
Design | Piston gate valve | ||
Operating voltage | 24V DC | ||
Standard nominal flow rate | 2.800 l/min |