| Type of actuation | Electric | ||
| Switching element function | N/C contact | ||
| Material housing | Die-cast aluminium PA | ||
| Note on materials | RoHS-compliant | ||
| Pneumatic connection, port 4 | Sub-base size 18 mm to ISO 15407-2 | ||
| Pneumatic connection, port 2 | Sub-base size 18 mm to ISO 15407-2 | ||
| Pilot exhaust port 82/84 | Ducted Not ducted Either: | ||
| Type of mounting | On sub-base | ||
| Electrical connection | 4-pin Plugs To ISO 15407-2 | ||
| Residual ripple sensor | ± 10% | ||
| Max. output current sensor | 200 mA | ||
| Short-circuit strength sensor | Pulsed | ||
| Product weight | 140 g | ||
| Ambient temperature | -5 °C ... 50 °C | ||
| Relative air humidity | 0 - 90% | ||
| Corrosion resistance class CRC | 0 - No corrosion stress | ||
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Pollution degree | 3 | ||
| Characteristic coil data | 24 V DC: 1.6 W | ||
| Nominal operating voltage DC | 24 V | ||
| Max. positive test pulse with 0 signal | 1.500 µs | ||
| Valve - sensor switching time off | 9 ms | ||
| Switching time on | 12 ms | ||
| Flow rate of pneumatically interlinked valve | 550 l/min | ||
| Flow rate of valve on individual sub-base | 600 l/min | ||
| Pilot pressure | 3 bar ... 10 bar | ||
| Switching position sensing | Normal position via sensor | ||
| Reverse polarity protection sensor | For all electrical connections | ||
| Measuring principle | Inductive | ||
| Flow direction | Non-reversible | ||
| Type of piloting | Pilot actuated | ||
| Mounting position | optional | ||
| Exhaust-air function | With flow control option Via throttle plate Via individual sub-base | ||
| Degree of protection | IP65 NEMA 4 | ||
| KC mark | KC-EMV | ||
| Design | Piston gate valve | ||
| pneumatic working port | Sub-base size 18 mm to ISO 15407-2 G1/8 | ||
| Construction width | 18 mm |
| Valve function | 5/2-way, monostable | ||
| Material screws | Galvanised steel | ||
| Material seals | FPM NBR | ||
| Pneumatic connection, port 5 | Sub-base size 18 mm to ISO 15407-2 | ||
| Pneumatic connection, port 3 | Sub-base size 18 mm to ISO 15407-2 | ||
| Pneumatic connection, port 1 | Sub-base size 18 mm to ISO 15407-2 | ||
| Pilot air port 12/14 | Sub-base size 18 mm to ISO 15407-2 | ||
| Sensor connection | Plug 3-pin M8x1 | ||
| Voltage drop sensor | ≤ 2 V | ||
| Max. switching frequency sensor | 5.000 Hz | ||
| Idle current sensor | ≤ 10 mA | ||
| Operating voltage range, DC sensor | 10 V ... 30 V | ||
| Max. tightening torque for valve mounting | 0,8 Nm ... 1,2 Nm | ||
| Sound pressure level | 85 dB(A) | ||
| Media temperature | -5 °C ... 50 °C | ||
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Permissible voltage fluctuations | +/- 10 % | ||
| Immunity to surge | 2,5 kV | ||
| Switching output | PNP | ||
| Max. negative test pulse with 1 signal | 800 µs | ||
| Duty cycle | 100% | ||
| Valve - sensor switching time on | 32 ms | ||
| Switching time off | 38 ms | ||
| Valve flow rate, pneumatically linked, flow optimized | 700 l/min | ||
| Flow rate of valve | 750 l/min | ||
| Switching status display sensor | LED | ||
| Signal status display | LED | ||
| lap | Positive overlap | ||
| Symbol | 997,392 | ||
| Pilot air supply | External | ||
| Manual override | Detenting via accessory Non-detenting | ||
| Sealing principle | Soft | ||
| Nominal size | 5 mm | ||
| CE mark (see declaration of conformity) | To EU EMC Directive | ||
| Type of reset | Mechanical spring | ||
| Operating pressure | -0,9 bar ... 10 bar | ||
| Standard nominal flow rate | 550 l/min |
