| Pollution degree | 2 | ||
| Nominal altitude of use | <= 2000 m NHN | ||
| Material in contact with the medium | ETFE FPM PC PEEK PPS High-alloy stainless steel | ||
| Material number of dosing needle | 1.43 | ||
| Note on fluid connection | Fitting enclosed for tubing with 3 mm outside diameter | ||
| Type of mounting | Via through-hole for M3 screw Via female thread and centring sleeve Either: | ||
| Product weight | 220 g | ||
| Note on degree of protection | In assembled state | ||
| Media temperature | 5 °C ... 50 °C | ||
| LABS (PWIS) conformity | VDMA24364-B2-L | ||
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 | ||
| Instructions on use | See application note (available on the Support Portal at festo.com) | ||
| Medium | Liquid media | ||
| Nominal operating voltage DC | 24 V | ||
| Electrical power consumption | 1,8 W | ||
| Note on switching time off | Depends on configuration, environment and application | ||
| Note on switching time on | Depends on configuration, environment and application | ||
| Note on switching frequency | Dependent on the ambient temperature and installation state | ||
| Note on dosing precision | Depends on configuration, environment and application | ||
| Note on dosing volume | Depends on configuration, environment and application | ||
| Water flow rate at max. operating pressure | 370 µl/s | ||
| Type of reset | Mechanical spring | ||
| Sealing principle | Soft | ||
| Length of dosing needle | 30 mm | ||
| Nominal size | 0,8 mm | ||
| Operating pressure | 0 psi ... 7,25 psi |
| Relative air humidity | 0 - 95% Non-condensing | ||
| Type of actuation | Electric | ||
| Note on materials | RoHS-compliant | ||
| Material of dosing needle | High-alloy stainless steel | ||
| Fluid connection | 8x UNF1/4-28 | ||
| Electrical connection | 9-pin Plugs Sub-D | ||
| Ambient temperature | 5 °C ... 40 °C | ||
| Degree of protection | IP30 | ||
| Storage temperature | -20 °C ... 70 °C | ||
| Corrosion resistance class CRC | 0 - No corrosion stress | ||
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 | ||
| Note on the medium | Observe resistance of materials that come into contact with the media | ||
| Permissible voltage fluctuations | +/- 10 % | ||
| Information on power consumption | Specification per valve | ||
| Duty cycle | 50% (max. switch-on time 1 s) | ||
| Switching time off | 2 ms | ||
| Switching time on | 7 ms | ||
| Max. switching frequency | 4 Hz | ||
| Typical dosing precision | <1% CV for volumes >5 µl <2.5% CV for volumes between 1-5 µl | ||
| Min. dosing volume | 1 µl | ||
| Type of piloting | Direct | ||
| Mounting position | optional | ||
| Grid dimension | 9 mm | ||
| Nominal width of dosing needle | 0,32 mm | ||
| Internal volume | 113 µl valve with fluid connections | ||
| Valve function | 2/2-way, closed, monostable |
