Festo 8063372 dispense head

Name: 8063372 Festo
Brand: Festo
SKU: 683402-en-usd
Price: 783.12 USD
Availability: InStock

VTOE-D7-T3-M22C-08-F-P-P-S

$783.12 1 pcs. with 1 to 3 days delivery to United States

Specifications

Series (VTOE)	Dispense head
Valve positions	1 valve position
Output connection (D7)	Nozzle, length 30 mm, nominal size 0.32 mm
Input connection (T3)	For tubing 3 mm
Valve function (M22C)	2/2-way valve, normally closed

Nominal width (08)	0.8 mm
Diaphragm and sealing material (F)	FFPM
Housing material (P)	PEEK
Manifold block material (P)	PEEK
Valve control (S)	Individual connection, electric, with ﬂ ying leads, 0.2 m

Note on dosing precision		Depends on configuration, environment and application
Operating pressure		0 psi ... 7,25 psi
Nominal size		0,8 mm
Length of dosing needle		30 mm
Sealing principle		Soft
Type of reset		Mechanical spring
Water flow rate at max. operating pressure		370 µl/s
Note on dosing volume		Depends on configuration, environment and application
Max. switching frequency		4 Hz
Switching time on		7 ms
Switching time off		2 ms
Duty cycle		100% with individual mounting 50% in case of block mounting (max. switch-on time 1 s)
Nominal operating voltage DC		24 V
Medium		Liquid media
Instructions on use		See application note (available on the Support Portal at festo.com)
Shock resistance		Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
LABS (PWIS) conformity		VDMA24364-B2-L
Media temperature		5 °C ... 50 °C
Note on degree of protection		In assembled state
Product weight		18 g
Cable length		0,15 m
Conductor nominal cross section		AWG28
Fluid connection		UNF1/4-28
Material of dosing needle		High-alloy stainless steel
Note on materials		RoHS-compliant
Type of actuation		Electric
Relative air humidity		0 - 95% Non-condensing

Valve function		2/2-way, closed, monostable
Internal volume		113 µl valve with fluid connections
Nominal width of dosing needle		0,32 mm
Grid dimension		9 mm
Mounting position		optional
Type of piloting		Direct
Min. dosing volume		1 µl
Typical dosing precision		<1% CV for volumes >5 µl <2.5% CV for volumes between 1-5 µl
Note on switching frequency		Dependent on the ambient temperature and installation state
Note on switching time on		Depends on configuration, environment and application
Note on switching time off		Depends on configuration, environment and application
Electrical power consumption		1,8 W
Permissible voltage fluctuations		+/- 10 %
Note on the medium		Observe resistance of materials that come into contact with the media
Vibration resistance		Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Corrosion resistance class CRC		0 - No corrosion stress
Storage temperature		-20 °C ... 70 °C
Degree of protection		IP30
Ambient temperature		5 °C ... 40 °C
Electrical connection		2-wire Cable Open end
Wire ends		Sheath removed
Type of mounting		Via female thread and centring sleeve
Note on fluid connection		Fitting enclosed for tubing with 3 mm outside diameter
Material number of dosing needle		1.43
Material in contact with the medium		ETFE FFPM PEEK High-alloy stainless steel
Nominal altitude of use		<= 2000 m NHN
Pollution degree		2