| Valve function | 2/2-way, closed, monostable | ||
| Standard nominal flow rate | 430 l/min | ||
| Switching time off | 18 ms | ||
| Material housing | High-alloy stainless steel | ||
| Material seals | FPM | ||
| CE mark (see declaration of conformity) | To EU Low Voltage Directive | ||
| Degree of protection | IP65 | ||
| Design | Directly actuated poppet valve | ||
| Sealing principle | Soft | ||
| Type of mounting | In-line installation | ||
| Electrical connection | Type A Plugs To EN 175301-803 Square design | ||
| Manual override | None | ||
| Medium | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gases Mineral oil Water Neutral fluids Other media on request | ||
| Pressure difference | 0 psi | ||
| Insulation material class | F | ||
| Duty cycle | 100% | ||
| Type of piloting | Direct | ||
| Medium pressure | 0 psi ... 58 psi | ||
| Media temperature | -10 °C ... 80 °C | ||
| Leakage rate to EN 12266-1 | A |
| Flow rate Kv | 0,4 m³/h | ||
| Switching time on | 20 ms | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Material number housing | 1.43 | ||
| Product weight | 500 g | ||
| CE marking (see declaration of conformity) | To UK regulations for electrical equipment | ||
| Corrosion resistance class CRC | 3 - high corrosion stress | ||
| Type of actuation | Electric | ||
| Mounting position | optional | ||
| Connection Process valve | G1/8 | ||
| Nominal size | 6 mm | ||
| Flow direction | Non-reversible | ||
| Nominal pressure PN | 100 | ||
| Characteristic coil data | 230 V AC: 50/60 Hz, pick-up power 18.0 VA, holding power 15.0 VA | ||
| Permissible voltage fluctuations | +/- 10 % | ||
| Type of reset | Mechanical spring | ||
| Symbol | 992,979 | ||
| Max. viscosity | 22 mm²/s | ||
| Ambient temperature | -10 °C ... 35 °C |
